how do i clock this?

here is what i have: a digi 002 and a mytek adc. right now i clock the system with the mytek via spdif. i am adding a digimax to my setup and it has wrdclk on it as does the mytek. the digi 002 does not have wrdclk on it. so,while recording with the digimax should i clock the 002 with the mytek via spdif like i am doing now, or should i clock the digi 002 internally and hook the digimax up to the myteks wrdclk? what method would give the best results sonically? also, i have been told that you CANNOT record with both adat and spdif at the same time. is this true? __________________

Use the Mytek as masterclock. Feed wordclock from the Mytek to the Digimax. Clock your 002 to either one of them. Mytek internal sync Digimax external/wordclock 002/ptle External (either to the Mytek or the Digimax)

And you CAN record adat and spdif at the same time, but you then have to use the RCA-spdif, and not the optical, as that is being used for the adat.

maskedman72 . Quite simple, really; -leave the Mytek><002 unchanged -run BNC W/C cable from the Mytek to the Digimax W/C in -set Digimax to clock off external WC > the Mytek should of course always be on, as it supplies the master clock for your system < done...

See post #751464 above.. It will work solid and give you 8X ADAT optical and 2X SPDIF coax feeds to the 002. happy tooling,